Please help me on how to set up this in motion analysis so that the tube will fall since the center of gravity is not balance
It should be easy enough, first make sure you are using the motion analysis option
Then add gravity in the correct direction in accordance to the way you have modeled the assembly, and also add a solid body contact between the 2 parts.
If you have used any mates in this assembly make sure the mates are suppressed in the motion analysis (right click on the mate and suppress, make sure the timeline is at zero seconds also so that this is suppressed from the start of the motion study) If you don't suppress the mates then the study may not simulate as you expect.
Once you have done this then click on the calculate button to calculate the study.
If you find the part drops under the floor then you may need to increase the frames per second in the motion study properties.
I've attached my version, created in Solidworks 2015
Thanks Sir it works. have a nice day sir!
Retrieving data ...