Any ideas why under the Hole wizard -> Hole Type "Hole" -> Standard "ISO" -> Type: Dowel Holes ->Size "No Ø7"
Any answers or directions will be much appreciated.
P.S. it might be just me or there are no pins with Ø7
Pins Ø7 doesn't exist under ISO standard...
Well if you say so.. I totally accepted!
However when I do custom size I get the wrong description on the feature tree.For example let's say that the Ø6 is initially selected and then below I check the box with the "Show custom sizing" I will still get the Ø6 on the feature description.
Many thanks Paolo!
It will show as Ø6 in feature tree, but the actual size will be 7mm
If you want to get the correct size, you can add this size to your hole wizard in the toolbox settings (Ø7mm dowel pin is non standard size)
Retrieving data ...