1 Reply Latest reply on Jul 1, 2015 10:13 AM by Peter De Vlieger

After re-building a fairly large part, I used the original drawing format to save time creating the detail drawing. The file size for the drawing somehow became ten times the size of the original drawing and is next to impossible to work on now. The part

James Jones Jul 1, 2015 9:15 AM

After re-building a fairly large part, I used the original
drawing format to save time creating the detail drawing. The file size for the
drawing somehow became ten times the size of the original drawing and is next
to impossible to work on now. The part size is ok. Just the drawing has become
huge. Any advice?

Re: After re-building a fairly large part, I used the original drawing format to save time creating the detail drawing. The file size for the drawing somehow became ten times the size of the original drawing and is next to impossible to work on now. The p

Peter De Vlieger Jul 1, 2015 10:13 AM (in response to James Jones)

James,

See this post
https://forum.solidworks.com/thread/79282?q=size%20drawing

E.g.: I had a drawing that was close to 10MB, after switching to high quality views that same drawing was less then a 1MB

Have a nice one.
Peter
Like Show 0 Likes(0)

Actions