AnsweredAssumed Answered

Holes in part appearing to not go all the way thru when looking top down from above part (probably a scene or color setting?)

Question asked by Dave Krum on Jun 4, 2015
Latest reply on Jun 4, 2015 by Dave Krum

Like • Show 0 Likes0
Comment • 5

Hello All,

Quick (stupid) question. Just upgraded from 2010 to 2015. I have my default scene set to "plain white". I noticed that when I turn my part around, the holes that are in it appear to go all the way thru part when looking from the bottom up, but when looking from top down they appear "solid" and not going all the way thru part. I don't recall ever having this type of view before. What am I missing? I probably changed a color setting somewhere unknowingly during my SW setup at install time. Not a problem, just an annoyance. I've attached the part. Thanks in advance.

Ingvar Magnusson Jun 4, 2015 2:08 PM

Correct Answer

Maybe this, see image.

See the reply in context

Attachments

Part6.SLDPRT.zip69.0 KB

No one else had this question

Outcomes

John Stoltzfus Jun 4, 2015 2:07 PM

You have your view set with Shadows

Actions

Dave Krum @ John Stoltzfus on Jun 4, 2015 2:18 PM

Hi John,

I tried this first but with the view settings having "shadows in shaded mode" turned on, this made no difference by unchecking it first. I don't have the floor reflection option like you. Not sure why. Thanks.

Actions

Steve Calvert Jun 4, 2015 2:06 PM

Turn off the shadows and see if that helps.

Actions

Ingvar Magnusson Jun 4, 2015 2:08 PM

Maybe this, see image.

Actions

Dave Krum @ Ingvar Magnusson on Jun 4, 2015 2:14 PM

Thanks for the quick response guys. It was the "shadows in shaded mode" being checked off. I no longer have 2010 but I thought I always had shadows checked. Maybe never noticed. That did the trick. Thanks again all.

Actions

5 Replies

John Stoltzfus Jun 4, 2015 2:07 PM
Mark Correct
Correct Answer
You have your view set with Shadows
Like • Show 0 Likes0
Actions
- Dave Krum @ John Stoltzfus on Jun 4, 2015 2:18 PM
  Mark Correct
  Correct Answer
  Hi John,
  I tried this first but with the view settings having "shadows in shaded mode" turned on, this made no difference by unchecking it first. I don't have the floor reflection option like you. Not sure why. Thanks.
  Like • Show 0 Likes0
  Actions
Steve Calvert Jun 4, 2015 2:06 PM
Mark Correct
Correct Answer
Turn off the shadows and see if that helps.
Like • Show 0 Likes0
Actions
Ingvar Magnusson Jun 4, 2015 2:08 PM
Unmark Correct
Correct Answer
Maybe this, see image.
Like • Show 1 Like1
Actions
- Dave Krum @ Ingvar Magnusson on Jun 4, 2015 2:14 PM
  Mark Correct
  Correct Answer
  Thanks for the quick response guys. It was the "shadows in shaded mode" being checked off. I no longer have 2010 but I thought I always had shadows checked. Maybe never noticed. That did the trick. Thanks again all.
  Like • Show 0 Likes0
  Actions

Holes in part appearing to not go all the way thru when looking top down from above part (probably a scene or color setting?)

Attachments

Outcomes

Related Content

Recommended Content