can we also achive it if we have only one configuration in assembly file. and BOM type is part in bom property?
"Display configurations of the same part as separate items" option won't work for your case. You need to insert another instance of the same part with changed configuration to have this option work. Further the item number would be different.
So best would be to do this manually by adding a row and enter the required information. BTW why you need to do that?
That particular part is almost same but is getting manufactured from 2 manufactures , therefore we have assign different part number & description in order to identify manufacturer. Overall that assembly has one part that can be replaced by another identical part. Therefore I need to keep item number same. It is kind of " OR" situation for that part in that assembly line.
SInce it´s like that.
Why don´t you just do a "save as copy" for the second one change the HCA code and the description for it. Add it in the assembly and suppress it´s contents, not the part itself only the tree so you can see the part in the tree but everything in the part is suppressed (no geometry for that one). Or you just have another configuration of the part in the tree with correct descr. and hsa code, only with suppressed geometry or deleted body or whatever.
For the BOM you group those two parts so they will have the same item no.
Then everything becomes exactly like you wanted it.
You will have:
- The part in the BOM like you want to
- Correct descr. and hsa code
- with the correct item no.
- no geometry in the model for the second one
Why don't simply change the description and ADD both descriptions in one part separated by a / or OR. This way there would not be need of extra part and you don't need to do any secondary workaround when using the same part again.
LINE M/F PRESSURE 30CM CLEAR OR LINE M/F PRESSURE 30CM
LINE M/F PRESSURE 30CM CLEAR / LINE M/F PRESSURE 30CM
Yes! i can add both HCA Code & descriptions as OR in single part. but that might be confusing among code and part.
neverthless, this is one of good solution, i may use this.
I am going to use your solution. i made sonfiguration specific property in that PART NO.3. No in BOM in Drawing it fetches properties from custom property. how can i get properties from configuration specific.
snapshots are attached.
i am getting these properties:
i need this configuration specific:
i am new to BOM & Detailing Kindly suggest.
i adopted your solutions and managed to get in my drawings.
Very Thanks! for valuable help.
You could create a sub-assembly with the part and a dummy part that has no geometry but has the BOM information you need.
We do that all the time.
Create a virtual assembly with both of the items you want to appear as different configurations, then just choose the right config of the virtual assembly to show with each main config of the main assembly. That way, both items will show up as the same item.