How do you include drawings when you pack & go an assembly?
View the attached link.
SolidWorks Pack and Go overview - YouTube
SOLIDWORKS - Pack and Go - YouTube
Thanks and Regards
E G S Computers India Pvt. Ltd.
http://www.egsindia.com | http://www.egs.co.in | http://www.egsindia.blogspot.in
I didn't look at the links that VENKATESH S. posted, but in order for the "Include drawings" option to work with Pack and Go the drawings need to have the same file name as the models.
You may be right Glenn, but are you sure the file name must be the same? It can take a long time to add drawings - seems like it is doing a where-used search.
Brian McEwen wrote: You may be right Glenn, but are you sure the file name must be the same?
Brian McEwen wrote:
You may be right Glenn, but are you sure the file name must be the same?
I'm only going by what others here have said. I don't use that workflow myself, since I have the assembly and components detailed in the same drawing.
the file name does not need to be the same. in my experience
Drop the top assembly in a drawing and pack and go from there instead of the assembly file. I had issues with the drawings not going with the pack and go, even though I checked the box, so I found that if you put the assembly in a drawing view save it, do the pack and go and then check the box that is mentioned above. Didn't have issues since then...
Retrieving data ...