IS THERE A WAY TO ADD SIZE TO PRECALCULATED FORMULAS IN THE CUTLIST PROPERTIES. I.E.
"SW-3D-Bounding Box Width@@@Cut-List-Item3@testtest.SLDPRT" =15"
"SW-3D-Bounding Box Width@@@Cut-List-Item3@testtest.SLDPRT" + 1" = 16"
There is no way that I know of for to create an equation in the cut list properties that will do what you need.
Going by your question above if you want the cut length to show up as 16" and not 15" in your weldment cut list in your drawing. The only way I can think of getting this to show up in your drawing is to create your weldment cut list and then add 2 new columns. lets call one column "over length" and the other "cut length". In the column "over length" type in the value that you want the part to be over cut by in the required cell, in your case type in 1. Now select the cell under the column "over length" and click on the equation icon
Now in the box that appears select the first cell followed by + then the second cell that you want to add together and press enter
You can now do the same for the rest of your cut list. You can then hide the columns called "length" and "over length" if you do not want to see them
Retrieving data ...