First of all I'm Italian so my English is not perfect.
I'm new with the Simulation package so I'm doing some test.
Today I tested a model (I have problem to insert images) using a fix fixture on the bottom plate and adding a load of 500000 N on the top plate + Gravity force. These parameter are fix.
As material I used steel AS3678-350.
When I set up the model, to avoid problem with the simulation, I select all the bodies under the Cutting list, right click and I select the command "insert into new part". Usually like that I got less meshing problems and contact problems. Is it a bad idea?
Here my issue. I've used different mesh sizes, first 62mm, second 31mm and third 15mm and I got different results.
62mm = 46.000.000 N/m^2
31mm = 61.500.000 N/m^2
15mm = 66.000.000 N/m^2
Is it normal? Can I trust the last result of 66.000.000 N/m^2?