How do I add the Angle1 and Angle2 fields to the weldment cutlist template so they show up every time I create a cutlist? I am using SW 2014 SP4. I know how to manually add them but don't really want to have to do that with every part drawing.
Add them to the cut list table as required. Now right click on the cut list table in drawings and select save as. In the pop up window define the path for the cut list table template (in case you're saving at different location than SW default, then make sure you set the path under Tools > Options > File Location > Weldment Cut List Templates).
That works exactly as you said Thank you. I now see the Angle 1 and Angle 2 fields but they are not populated with the actual cut angle. If I go to the cut list items and check each individual item's properties I see that the correct cut angle is there but it does not show up in the actual cut list.
Make sure when you added the columns, those are set to link to Angle property. Will post a video later.
Here is video explaining the method. Are you doing the same process?
Thank you for the instructional video. That resolved my problem and the cut list is working just like I want it to.
Retrieving data ...