So I made a slot with a sweep and a profile. I know how to create a path mate between the sweep path and an outside object. However, I also did a linear pattern with the sweeping cut extrusion, to make the slot larger. all the slots cross eachother and keep continuing on whereever the other left off. When a linear pattern is done the sketch only appears on the first cut. This is the sketch i can do a path mate on. Now is it possible to make the sketch appear on the other parts of the linear pattern extrusion and connect them to make the path longer? It would take too much time to do another sketch over all the linear pattern and use that as a new path. The sweep is pretty complicated. Any help would be nice.