I'm trying to revolve this feature around an axis, but for some reason on one side the length is shorter than on the other.
I want to edge to be 1mm all around 360 degress. Revolve wont do it for me.
Anyone got any ideas?
Your surface has open gap inside.
Do the offset before the small revolve feature
Your new revolve axis is not the center line of radius (it's not related)
Thanks! That solved half of my problem.
I'm getting the 1 mm height on edges 180 degrees one from the other, but on +-90 degrees the edges are longer.
What can I do to make it 1mm all around? I tried surface offset cut with no luck
You can do a surface offset of 1mm of the shape and do a "cut with surface"
This will make a uniform thickness of 1mm
Tried that, got the following error
Retrieving data ...