Hi, I am kind of new user of Solid, and I have problems with assembly. I need to put flat part inside cylinder on specific position, but I can't do it with "Mate" option. I put the photos so you can understand better. I highlighted the face I need to connect with red.
How are the parts supposed to look after they're mated?
When I have somehing to mate to a cylinder I usually use the planes, or even make a plane to mate to. Sometimes you can use the cylinder's temporary axis, or face to relate the plane you make.
I'm on phone now, I'll try it in the morning. Thanks
Hei'ya Nikola, check the att. files,
inspect the different mates, only a few types,
maybe alter/delete and reset them,
to see how they function
hope this helps- have a good'n kelef
Thanks
Hi Nikola. Here is a work around to achieve your goal. Open each part and Put a construction line in the center of each that you want aligned. Then open assembly and mate the centerlines together and then the faces of each part together. Hope this help. Oh and you may want to make the centerlines visible on each part to do so. Let me know.
Thx, I already solved this.
How are the parts supposed to look after they're mated?
When I have somehing to mate to a cylinder I usually use the planes, or even make a plane to mate to. Sometimes you can use the cylinder's temporary axis, or face to relate the plane you make.