can you explain to me about my design? what are enoughs with my design to lift a load 35000 N,and can you explain detail to me about results from my simulations.thank"s
what are your design criteria? (what makes a successful design for this project)
thanks.mr jared for your respons,I need explained about my results design from simulation, or explain about my design is safety to lift a load 35000 N .so my design is good or not to lift that load, please advice
What cause of. Failure are you concerned with?
no, Mr jared. I want know about my design, enough or no to lift load 35000 N, result of simulation can you see at picture(attachment) and explain result of simulation to my customer, because that results will attached at certificiate.please advice
You need to have an engineer in your company look at your simulation results, or hire an engineering firm or PE to review your design. I would not trust anyone on any forum to tell me if my design was good from a single image of a simulation result.
You also should not expect people on a forum to tell you that your design is good, especially when you consider the lack of information you have provided.
If you would like help interpretting what SW Simulation is telling you, then answer Mr. Conway's questions so we know how to help you.
thanks for your suggestion,phil.
mr jared : in actual this product has been fabricated and delivered in site, but my customer want know maximum load can be applied at this product and must have a certificiate. in first time design product for material reference from my customer spec.so, with simulation results,what are do?please advice
Attach your assembly here.
Users can comment on the analysis, but they cannot certify the analysis.
You will have to hire an engineer qualified to make this certification.
You might be able to save some time (money) by first having the users here examine your analysis, make any changes suggested, and then submit all the information to your certification engineer.
I think Suwito needs to tell us what he's concerned with. The welds? The weldments? Is he concerned with a single load? Fatigue? Brittle failure? Ductile failure?...etc. It is a pretty complicated request to "evaluate" a design.
Suwito, if you know this, we could point you to how in the software this can be done. Otherwise if you're looking for someone to sign-off on your analysis, it might be good to get someone to do that for you. I have some contacts if you're interested in that. PM me.
Retrieving data ...