Has anybody had a problem with edges missing in a section view?
this has been happening a lot on our drawings and we've resorted to manually drawing in the edges which is a pain sometimes.
Any idea how to fix??
Please try the setting changes explained in below discussion
Which version of SW you use
read the thread and looks like hes having the same problem. and the solution was SPR 688961. But whats an SPR?
Service Performance Report..... Bug report.
Get with your SolidWorks reseller (VAR) to log a bug report.
I just ran across this myself. I used the settings from the other post but they didn't help. I then went into the "More Properties" button and saw a check box to "Hide cutting line shoulders". Unchecking this gave me back all but one of my edges.
To get the last edge back I decided to check hidden edges. For that I clicked on the view without touching an edge selected the tool from the menu. That brought up the hide/show edges manager and the edge had somehow been hidden when hiding some other line.
Hope this helps.
Anyone know why the only place I can find hide/show edges is on the that menu bar? It doesn't even come up to add as a keyboard shortcut.
After a little more trial and error I think I know what was happening on my section view. My section lines were 315° apart as the program saw it. This somehow leads to the missing edges. A section through the same nozzle with a starting leg at or under 180° will show the edge. Anything over looses the edge and you have to uncheck the "Hide cutting line shoulders".
Retrieving data ...