I have tried many ways and was not able to achieve the 10 degree circular emboss callout. Please advise or let me know what I'm doing wrong.
Thanks in advance.
Try drawing some construction lines over the circle that have a 10 degree arc and diemnsion that instead.
I would like to apply the embossed as sheetmetal forming tool, not just extruded boss.
I'm not a native English speaker, but if I get what you need correctly, you'll have to create a specific forming tool, using the standard one "at an angle" will not work.
I've attached an example, I hope it can help you
Thank You very much. I was doing the same step procedures as you did.
The only difference that I did see was you have formulas for Fillets.
I guess that was where my problem was. By any chance, can you help me explain or
links that will help me with formulas? Thanks in advance.
Check the help or your manual for equations.
In a nutshell: RMB annotations folder - show feature dimensions. DoubleClick the fillet radius and instead of a value type = to start equation. Now click on another dimension and add /2 for this example.
Retrieving data ...