I have a problem , I have a linear pattern in the assembly , the assebmly has configuration . the problem that the linear pattern doesnt show the full number of pattern for each configuration. Please I need your help.
Without the files it'll be hard to look at the issue. BTW does the number is more or less? Can you add the files or some screen shots?
as you see in both direction one beam missing. I attached two files. look into GF and try to change the configuration many times, some times it works and some times it doesn't.
It's hard to tell what's going on as your attachment does not have all of the required files. Including "L-parameter" which is needed for one of your equations.
My guess is that it has something to do with the order of operations. ie: Your equation is getting calculated before some geometry that it needs gets updated.
sorry I forgot the angle. it is attached now.
I cycled through every configuration at least once, then randomly switched between multiple configs. I never saw an issue where the beams were not equally spaced, or missing the beam on one end.
My guess is that some components are getting hidden when switching configs. Set each configuration to have it's own display state, then make sure you Unhide all of the patterned components in each configuration. Once you do that, they should show up correctly when switching configs.
Retrieving data ...