does anyone have a good site that they use to upload / download any 3D model files??
At the moment I am specifically looking for a VW Crafter model??
Are probably your two best bets.
Edit:A 10 second google search produced this:
Yes I use both of those two and I did see that after the same search - I just wasnt sure which one would be best to use with SW?
As far as any other websites go - I was searching for any others. Being relatively new to this - just exploring what is out there.
Thanks for the suggestions!
When you say you are after a VW Crafter, do you just want just an "outside" representation of the vehicle ? or do you want exact VW body panels?
Are you designing "for inside" of the vehicle!
I design Motorhome and Special Purpose vehicles and we obtain complete body panel models direct from Mercedes-Benz and Volkswagen. They should supply to you (request via the national distributor) Mercedes-Benz Sprinter (same body as the VW Crafter from the A pillar back) were selling the DVD's via there Bodybuilder website!
They come as parts which need to be assembled into a vehicle!
I have a post using Task Scheduler which may give you some assistance! http://michaellord.posterous.com/new-post-about-time-i-used-task-scheduler-sol
I am working on a design that modifies from on top of the van - so I am looking at the physical locations of where the internal metal rib structure is in the ceiling of the van - as well as the fiberglass top. I do not currently have access to taking a van apart to actually take any measurements of the internal metal rib structure.
I would be interested in purchasing some of these parts if it had the data of course.
I would like to build the assembly in Solid Works of course.
If you are just after the roof structure at this stage I can send you that.
If you let me know the model, (SWB, LWB, XLWB) I can put together something reasonably quickly!
If you want to email me. firstname.lastname@example.org
Well I will take what I can get!
the roof structure is essential to the design as I will have to design around any metal ceiling ribs. and will be utilizing the fiberglass roof top design as well.
I am not overly certain of the model I will send you an email!
Ryan, you may look at following sites for some models (if you can find one) else contact the manufacturer.
The 3D Studio
Retrieving data ...