I created sub assembly with muliple configrations. I inserted the sub-assembly in the main assembly- not one but three sub assemblies - each one with different configuration.
I found the three sub assemblies not updated according to their configuration, but all the same size as per the sub-assembly view.
Could you help me how to fix that.
I attached the sub-assembly and the assembly , I appreciate your help.
regards
A.R.
I did , the three sub assemblies are all with different configuration , but the view in main assembly is the same for all , though they have different properties beside each sub-assebly name , in the main assembly
regards
A
A.R.,
I would start with RMBing on each instance of the sub-assembly in the tree, choosing the Component Properties icon, and making sure the desired configuration is being referenced. If it is, then I would open the sub-assembly and check each configuration to make sure that it's right. If you're already done that, or that doesn't fix it, then check back here.
I suspect that the 3 subassemblies are all referencing the same configuration. Right click a subassy, choose "component properties" and choose the correct configuration. Do this with each subassy.