We are looking at upgrading from our current systems and our IT guys just sent me their recommendation.
Is this system capable of handling very large assembles without hanging and locking up like our xw8600 work stations do?
Configurable- HP Z800 ENERGY STAR® Workstation
HP Z800 Workstation (ENERGY STAR)
Windows® 7 Professional 64-bit (Not supported with RAM 1GB.)
HP Z800 1110W 89% Efficient Chassis
HP Z800 Localization Kit
Intel® Xeon® E5620 2.40 12MB/1066 4C CPU-1(LOWPWR)
Intel® Xeon® E5620 2.40 12MB/1066 QC CPU-2 (LOWPWR)(Must be same speed as Processor 1.)
HP Air Cooling Solution (Must order Heatsink with this item.)
HP 2x High Perf Heatsink Thermal Kit (Required if Air Cooling Thermal Kit selected and two processors are HIGHPWR.)
NVIDIA Quadro 4000 2.0GB Graphics
No Item Selected
HP 32GB (8x4GB) DDR3-1333 ECC Reg RAM (Supported only with Dual Processor.)
300GB 10K RPM SATA 1st Hard Drive
16X SuperMulti DVDRW SATA 1st ODD