Welcome to the forum.
If you are talking about doing this in a drawing the answer is no using the normal section tools in the drawing mode.
But what you can do is create the cuts in the model whether it is in a part or assembly and maybe create a configuration
representing these cuts so it would be easy to toggle on/off. Then in your drawing create a view representing this configuration.
Hope this makes sense to you.
One option is to create a configuration of part/assembly as Scott explained in the part level
Another option is to make a regular section and crop view to the area you need.
Hope this helps
Has the Crop View tool not given you the results you are looking for?
Welcome to the forum. If you know the distance between the lines you can do a Section View, and set it to a partial section to that distance. I'm at home now and don't have SW here or I would put up a screen shot.
While In setion view set the option 'Section Depth' to the distance bertween the two lines.
Thanks to all of you for being so fast and helpful, all of you, I was quite surprised when I arrived at home
"In a normal section view you can define the section depth where it does not show anything beyond the depth specified."
I wish I could select multiple "right answers", BTW the screenshot was really good to let me solve my problem