Is it possible to import the dimensions of assembly feature( just like hole cut etc)to drawings by model item??
just like this feature:
Yes, Once you have your view placed in your drawing of the assembly
you can go to insert model items and make sure the "by feature" is selected
in the property manager is selected and either select it on the face of the
drawing or tree down to the feature in your assembly in the feature manager
and select it there.
Selecting feature is not work! It can't import demension to the drawing !
You mentioned the feature was a hole, was it created using hole wizard?
If so you need to make sure the hole wizard and location icons are selected
in the property manager. If this is not the case, can you up load your files
here for me to look at? I have done this before so I know it works.
The feature is cut extrude in assembly.I want to import it's demension to the drawing of part using model items.
I understand. Can you upload your model here so I can look at it?
This is the part in the picture:
Ok, I opened up the part and now I see what the issue is.
The problem is that feature is derived. Meaning it is referenced
to an outside feature (external reference). That is why in the feature manager
you see the ->?
If you create this feature from scratch then do as I suggested in the
previous postings it will work.
Retrieving data ...