i have configured part but unable create part drawings in seperate sheet and also assembly part drawing of configured assmwbly using these parts , i tired to created drawing for one assembly configured , but other configured assembly not possible .
Try after bringing in this view RCing on it and select properties.
Then you will see the list of configs you have created. At this point you should
be able to bring in your dimensions.
This same method will work for the assembly as well.
If you can explain the steps you've tried to get the drawings made, we can try to find out the issue/reason. Also share some screen shots of error or steps if you can.
first i configured part by configured using one dimensions , then drafted one of the confirgued part , but to draft another configured part , solid works asksor guides use existing part drawing i'm unable to draft that another confirgued part .
I'm not sure I understand what you are trying to do, but it sounds like you want to create multiple drawings, one for each configuration of your part. If that is what you want to do, then you can save your first drawing. Now do a Save As with a new drawing name and then change the configuration for each view to the appropriate configuration. Repeat as needed. As I recall, you can control select the views and change them all to the new configuration at once, but I could be wrong about that.
Retrieving data ...