i would like to see the combined effect like thermal,shock and static all these combined loading effect on my model ...

i would like to see the combined effect like thermal,shock and static all these combined loading effect on my model ...

How to combine the fatigue ,static and thermal etc...its like linear combination what we have in the pressure vessel design,but in this where we can combine only the linear static studies ...we can't include the other studies like buckling,fatigue,drop,nonlinear,dynamic etc., as per my knowledge

am i right or wrng,if so then how can we simulate the combined effect?

I know you can combine thermal to static and I believe you can combine thermal to nonlinear. You have to use the "Thermal/Flow" tab in the static or nonlinear study. I believe that is the extent to which you can combine different analyses, but there may be other ways. For example, in the GeoSTAR interface, there is a "linear combination" command. Hope that helps.

We know you can combine (or, couple) the thermal results into a static analysis (use the PM and look for the "Thermal/Flow" tab), but I am unsure you can automatically combine shock. The Response Spectrum module returns peak amplitude response, and if you are expecting linear behavior, you might be able to combine the two via simple sum.