My problem is about weight and material .I assigned for every part.However, I cant see when I put bom list on the sheet.I do see part number, item and quantity but I cant see weight and material. Could someone help me ?
This video explain exactly what I'm suggesting: http://www.youtube.com/watch?v=jHjv3u0-T50
Welcome to SW forums Ahmet
make sure your BOM has columns for weight and material. If not then right click on BOM and go to Insert > column. Choose the required property from the list. Repeat for other property.
For future you can save the BOM template so that you don't have to it again. Just right click on table and go to Save as and save your BOM template. Finally set the location for BOM template under Tools > Options > File Locations.
You might also find this post helpful for your future reference.
I tried to choice the required from the list.
For example there are on the list :
but there are no weight (mass) and material on the list
I think, I should add weight and material on the list but how?
Make sure your part file has weight and material properties under File > Properties > Custom/Configuration. Then add the column in the drawing BOM and the property should be there in the list.
At first, I should say. I use SW 2010
And File>Properties>Summary information and there is costum but this ist empty there is nothing in the list but i cant see part number item and quanity.If I cohice these
I do see when I put the bom list on the sheet.However, I cant see weight and material.I hope I could explain my problem.
To add mass properties:
Select Text from the Type list.
Under Value / Text Expression, select the appropriate mass property from the list.
Mass properties use the following, system-generated format:
SW-<mass_property>@ @ <configuration>@<model_name>
The value of the property appears under Evaluated Value.
Repeat this for material.
Now when you add column in the BOM, you should see these.
Can you put a screen shot of what you see when you open your part file and go to File > Properties > Custom tab.
Thank you for help .Super helpful video
Retrieving data ...