Can somebody help me in joining the two different assemblies ??? I have attached the assembly and part file through pack and go.
Is this what you are looking for ?
Great Job Mr. Sainath !!!
Yes I want it that way but i need to understand that how you joined two different pipes. I m facing below problems
a) When i edit one of the route it gets some flanged type of bends always.
b) not able to join both routes.
c) Inserting a 1/4" Coupling on both sides of Regulator
d) Joining Needle Valves with Cylinder via Hose or tubing
Can you please tell me the procedure how you have done it.
Thanks in advance.
Vigrously waiting for your reply Sir !!
Please see the attached zip files. I hope this will work for you.
Hello Mr. Sainath Mr. Ashok,
I have some other problems too.
1) I have one regulator of Fisher (http://www.3dcontentcentral.com/download-model.aspx?catalogid=171&id=192169). I want to put it in line, but this have 1/4" NPT Connections. When i insert a Male Connector tube fitting it gets .38 NPT automatically. (0.5T x .38NPT) If any way i use it then that tube will not going to get a expander (0.5 inch to 1") coz my line size is 1" only. You can refer my previous assembly. Also the inlet and outlet of the regulator are not on the same axis. They are little out. They dont come in straight line.
2) And m not able to draw a spline for tubing b/w cylinder and Needle Valves on header. (For Showing Flexible Hose Connection)
3) I want to understand the fundamental of Route point. It is still not clear to me.
4) One last thing is that I annotated my instruments parts as Text. Can i be able to show them in the BOM as per the text assign to them like S.No 1 is pressure switch and S.No 2 is Regulator.
My questions may bother you much....sorry for that...!!
Thanks & Regards
Thanks Mr. Ashok,
That I am able to do it now thanksss !!
Retrieving data ...