Would welcome your thoughts on this setup. Being used for heavily surfaced parts, linear FEA, and non-linear FEA, as well as some simpler assembly work (<500 components)
Base Unit: | Dell Precision T5500 Workstation (224-4858) | ||
Processor: | Six Core Intel Xeon Processor E5645, 2.40GHz,12M L3, 5.86GT/s,FPWS T5500 | ||
Memory: | 12GB DDR3 ECC SDRAM Memory,1333MHz,6X2GB,Dell Precision TX500 | ||
Video Card: | 1GB ATI FirePro V4800,Triple Monitor,2 DP and 1 DVI,Dell Fixed Precision | ||
Hard Drive: | 256GB Solid State Drive,2.5,Fixed Precision TX500 | ||
Hard Drive Controller: | C39 SSD boot + SATA Raid 5 drives, 4 drive configuration , T5500/T3500 | ||
Floppy Disk Drive: | No Floppy Drive, Dell Precision | ||
Operating System: | Windows 7 Ultimate,Media,64-bit, Fixed Precision, English | ||
TBU: | Mini-Tower Chassis Configuration,Dell Precision T3400,T5500 | ||
CD-ROM or DVD-ROM Drive: | 16XDVD-ROM Data Only Dell Precision TX500 | ||
Additional Storage Products: | 500GB SATA 3.0Gb/s with NCQ and 16MB DataBurst Cache, DellPrecision TX500 (341-8581) | ||
Controller Option: | PERC6/i SAS/SATA Hardware RAID Card - For Connecting Internal Hard Drives, Dell Precision T7400 (341-9043) | ||
3rd Hard Drive | 500GB SATA 3.0Gb/s with NCQ and 16MB DataBurst Cache, DellPrecision TX500 (341-8581) | ||
4th Hard Drive | 500GB SATA 3.0Gb/s with NCQ and 16MB DataBurst Cache, DellPrecision TX500 (341-8581) |
HDD configuration is 256gb SSD boot + 1.0tb usable Raid5 (3x 7200rpm hdd) for document storage.
Thoughts?