hi,
i tried creating a simple routing using tee and elbow supplied with solidworks, but for some reason the tee becomes crooked when inserted after the 45 degree elbow...
take note the tee only becomes crooked when inserted after the 45 degree elbow...when i use a 90 degree elbow , the tee comes i
n straight.
i've attached my files and some jpeg shot below.
hi Sainath,
that did the trick, make it along Y , this would save me a lot of time at work trying to manually rotate the tee, thanks so much.
i guess my next question is, should'nt tee comes in as vertical anyway, why is it inserting as crooked and have to manually straighten it up
thanks again
Try giving angular dimension between the pipe sketch.(ie 135 degrees)
hi,
just tried that tee still came in crooked, thanks.
I tried with piping given by you. Works fine with no error.
hi,
wonder mine is coming crooked then, anyways that first suggestion you gave me, add along y constraint, works, thanks for your help, appreciate it
Should there be any doubt, pls feel free to contact me.
Hi,
Edit the route, and Add "co-linear", then "'Along Y-axis" relation to the sketch around Tee. Should solve the problem.