I am trying to insert a design table into my drawing. I have 16 columns dependant on the width of the columns the most right columns disappear if I reduce the width they will appear again.
I have done that but it is the appearance in the drawing view that does not show all the columns. It appears that what I can see in the model view at a 100% size is equal to what I can see in the drawing view.
This may or may not be your issue, but when you try to insert/embed a Microsoft Word or Excel file into a SolidWorks Drawing, it will only show ONE, 8.5 X 11 sheet. So if you are in Word/Excel and you do a print preview and it doesn't all fit on one 8.5 X 11 sheet, the stuff that in on the other sheets will not show in the drawing.
The work around for this is in Word/Excel make your fonts smaller so everything fits on one sheet or change your Word/Excel page setup properties to scale to fit on 1 sheet, then in SolidWorks scale the object back up to legible size.
If you have too much data for this trick you have to insert/embed multiple Word/Excel files.
I hope this helps.
Retrieving data ...