Can i Create configuration in weldment,
Weldment structure containing four tubes in one config, three tube in other config
I have a question derived from the first post.
In a welded part i'm currently designing, some structural members aren't present in some configurations. I suppressed the features driving these members (instead of the suggested approach of using delete bodies). Problems surface when i proceed to apply weld beads to the structure in it's full featured configuration, and then, while switching to the defeatured configs, weld bead folder appears corrupt (since bodies welded in the full configuration are now supressed).
Seems to be that the weld bead folder is not configuration dependant?, so, i can't assign different welds to different configurations?
Thanks to all.
EDIT: I should add that i can't "supress" weld beads, it is a matter of chosing between leaving them broken or deleting them (thus, making them dissappear from the fully featured configuration)
Angelo De Dominicis wrote: I should add that i can't "suppress" weld beads..
Angelo De Dominicis wrote:
I should add that i can't "suppress" weld beads..
I don't have SW right now so can't confirm but AFAI remember you can suppress them. Right click on the weld bead feature in feature manager and select properties. Select suppress and then choose the configuration you want to keep it suppressed for.
You might also find this post helpful for your future reference
It worked, happens that i can't supress a weld bead subfolder, but individual beads can be supressed.
Retrieving data ...