So in the attached file, the "Cut" feature has an angle/tilt to it relative to its sketch plane (see "SKETCH Cut"), and I'm wondering why, slash what I can do to get rid of it.
All help is appreciated!
Thanks in advance,
As Maha Nadarasa stated "Outcome is a result of what you do.
You changed the reference for your "Sketch Plane Cut" from being the front plane.
to the face of the tapered surface.
the cut is normal to the sketch plane you get the "tilt". You really did not need to create a plane if you wanted the cut to be normal to the front plane. You could have put your sketch on the front plane then extruded in both directions (I try to avoid making planes when I do not have to).
Outcome is a result of what you do.
Wonderful, thank you!!
Retrieving data ...