Can you please help me make this a solid part?
downloaded part inside zip shows as 1 kb and corrupted. Try upload again?
Please try again
Hmmm. It is a solid part. I assume you want to fill the space between them with solid material? Or do you want to remove the sheet metal aspect of it?
I'll show both.
To make it solid by filling in the material, start the Loft command (solid loft, not surface loft) and select the inside faces of the two braces.
To make it solid as in "not sheet metal", delete the Sheet Metal feature in the FeatureManager (and then fix all the errors), and you see you've got a Solid Bodies folder instead of a Cut List.
Did either of those answer your question?
The second picture appears to have been redesigned. I would like to keep the same design.
No, just one of the features failed. After it's fixed, it looks like this.
Of course while fixing it, you have to get rid of the sheet metal settings inside the features, like the Normal Cut. With that setting set, SW thinks this is a sheet metal part, even if the Sheet Metal feature has been deleted. By the way, that setting is completely unnecessary for this feature, even in sheet metal.
Can you upload the file? I can't get the figure.
Retrieving data ...