I have routed a cable with 2 conductors defined as an associated cable core from the schematic. The routed cable shows the conductors leaving the jacket and they are interfering. How do I adjust this to show real life?
Jason, there's no interference detection/avoidance with Routing in Solidworks - because both cable cores are driven by a sketch originating at the Cable Connection Point, those thickened splines (wires/cores) will appear to collide like you've shown.
We can try to mitigate this a little with the "distance between" wires and cables routing parameter but multiple cores/wires coming out of a EwCable point will always look like that.
Retrieving data ...