I'm new to this program. I got a bottle making job, but for this, they have to make three bottles as a sample.The bottles are made but not lined up.I'm sending pictures of all three bottles.
thanks crate three bottle how can insert curve.
If the intersection between the flat corner surface and curved surface is supposed to create a straight line at the intersection like you circled in the right image, the upper curved surface cannot be a surface of revolution. To get the straight line, the upper surface will have to be created with some kind of surface feature like a loft or boundary surface.
1. Generate intersection curves - to be used later2. Remove this circular face3. Trim the corners4. Use the Surface-Fill command - Use intersection curves!
Thanks member but i am not understand how used Trim the corners of bottle and how used the last Surface-Fill command please explain this picture.
i used all also Generate intersection curves - to be used later and Remove this circular face are all so good work but how used trim the corners of bottle .
thanks my version solidworks is 10.
For cut corners use Trim Surface command (draw line and use as cuting object)
i am not understand For cut corners use Trim Surface command (draw line and use as cuting object) please Explanation how do this.
Attach the *.sldprt files of your attempts here.
Thinks for all members but i solidworks version 10 because my system is very low
Maha Nadarasa thanks but this file is not open my solidworks please attach low version or upload picture one by one
thanks all members replay me.
I do not have SWX 2010v. Place a line in the 1st bottle can also be done in this way in the video.
Thanks Maha Nadarasa and Krzysztof Szpakowski i understand
please i request u that help me all works.
Muhammad, sorry for the hard words but I have to write it. You write that this is a test task to get a job. We are happy to help young engineers, or those with extensive experience who have encountered a serious problem that they have not encountered yet. Advanced knowledge of surface modeling is often required in the bottle industry. Your models are not very difficult (look at the photo - 8 features - even without using the surface). This indicates your poor knowledge of surface modeling. I would even say that it's close to zero. And it is not fair to completely resolve these projects for you. It is not fair to the future employer, it is not fair to other candidates and it is not fair to you. Because the first day of your new job could be the last day. And a day of shame. Well, unless you assume that other projects will also be published here.I recommend to you learning SW. Modeling objects that surround you. We will be happy to help you with specific problems. But do not expect that after publishing a photo someone will do it for you (although there are some). And after acquiring basic knowledge - look for a job.It is also possible that this is a task from some freelancer portal that you undertook and you can not cope with it. Then waiting for ready solutions would be not fair to us.Once again, I'm sorry if you felt hurt
Thanks Krzysztof Szpakowski you replay me.
I'm sorry if you felt hurt? No i not felt hurt i happy u reply me with picture and help me and learn SW.
one week left i show these sample in office.
At first I was worried how I was going to do it but when you all joined me now I think I will do it.
Well, I've been making these bottles all day so I can make better bottles.
I think I have to learn the surface of this project.
please help my in surface of SW.
How to get this appearance?
Its standard SW material (white satin finish plastic) with small modifications
What type of modification?
Krzysztof Szpakowski and Maha Nadarasa brothers
Please think of me.
Hello Thanks reply me and help me.
You guys all help a little bit.
The head of this bottle will make it. You have to do this.
first i asked u that how will this be made?
Retrieving data ...