AnsweredAssumed Answered

Add a Cutout with the cover plate on a part in an assembly overlapping the cutout by 20mm each side with 7mm holes all around with a maximum distance between holes to be 140mm and a minimum of 100mm, is this possible to achive?

Question asked by Rohit Athmaram on Oct 30, 2019

Add a Cutout which can be edited with the cover plate on a part in an assembly overlapping the cutout by 20mm each side with 7mm holes all around with a maximum distance between holes to be 140mm and a minimum of 100mm, is this possible to achieve?

Outcomes