How is possible to do safety edge or hem on round edge using sheet metal design?
I want to do circle bin with safety edge for production.
Use the Hem tool if you're after a Hem
An edge flange will work as well
Yes I know that is possible to make hem and edge flange if you are having radius like in your case. Then it work. I have only circle that i can rotate. I try also wit swept flange but it is not working properly for flatten. Do you have similar suggestion in my case. Also i want to make pockets like on that picture bellow.
Thanks for the advice i try similar things with swept flange but only i get errors doing that when I want flatten,
Ignore the above one.
I try to do that it works. Do you know how can i do this pocket with safe edge on that curved surface. It is easy to create cut out but in this scenario i want to have hem or safe edge from inside circle material.
Hem is not possible but safe edge is possible - Fillet
The only way I've found for designing your part is the attached.
I don't like the method, but after several time trying, is the only way that works for me (SW 2018) for having the rolled bin and the flatten sheetmetal.
Good afternoon Raul
That is awesome what you did. I did only to have everything except pockets folded up. That was my main issues It there any way tthat you can attached your 3d model? I will be regret.
Hello John. You can use it with no problem. The 3d part is attached in my previous post.
Thanks i didn't saw under your pictures.
I can put resolve answer. Thanks you so much ones again.
Retrieving data ...