Are there any tools or functions that will cut in an angle? I am enclosing a picture, it is inside the red circle I am curious about, if it is possible to use like a revolved cut and tell it to cut in an angle or something else that is appropriate?
How much training have you had in the software? This is the sort of feature that is covered very early in most classes.
thanks for helping out and responding.
i am "self-taught".
it is possible that this is covered early but in my neck of the woods things are very different, and it would have shocked you how things work and how dramatically things changed in just one year. so trust me, i do not bother you or anyone else because i do not have anything to do, i post because i really need that small piece of information to move on and i ask because i got stuck and can not find the information on my own and 95% of what i know i learned on my own or through this forum. if you feel like it is rookie question do not answer my postings.
I would model it as Revolved in the first place.
I guess you could do a Revolve - Cut after-the-fact.
J. Mather wrote: I would model it as Revolved in the first place.I guess you could do a Revolve - Cut after-the-fact.
J. Mather wrote:
Hey, I noticed that your sketch isn't fully defined. For shame!
Just kidding Mr. Mather.
OP failed to provide dimensions or attempted example *.sldprt.
You could also a chamfer for this. You must use the 90° complement for the chamfer angle:
it is ok.every expert is transformed from a green hand.come on!
Retrieving data ...