Trying to use a dxf. file to create a sheet metal model that I can continue to develop and ultimately use in an assembly.
Use it as a sketch and create model, yes.
Thanks Frederick, appreciate the assistance.
Yes it can be done, conditionally. What you want to do is start a sheetmetal part and create a sketch. Now open the DXF or 2D drawing and copy the drawing profile. Go to the sheetmetal sketch and Contl-V to place the sketch. You will need to have a known dimension from the 2D so that you can scale the sheetmetal sketch to match. Then all you have to do is accept the sketch and set the material thickness. Now you can add the bends where needed.
Thanks Jim, I finally got it!
Retrieving data ...