Hello everyone. I'm trying to draw the attached bevel gears. Normally I would do a loft cut from a solid, but currently having difficulty. Any tips as to how I could attack drawing this gear. I only have solidworks standard.
Jose, you may be able to find a model here as well if it helps ... At a minimum you could download one and run through the design process ...
3D ContentCentral - Free 3D CAD Models, 2D Drawings, and Supplier Catalogs
I tried finding them on McMaster-Carr as well but all the models I tried are either an "Imported Part" or "Solid Bodies" which are of no help for reverse engineering.
Check out these Tutorials on YouTube . . .
solidworks bevel mitre gears - YouTube
Attach your attempt file, then only it is evident where you have problem. Because it is simple.
Look at this file and see how they modeled it.
3D CAD Model Collection | GrabCAD Community Library
You can also go to
Forum SEARCH RETURNS - Over 180,000 Search Returns - 119 Categories - Excel (10/14/2019) Updated SPR (Service Performance Request) Searches
Download the Excel File and take a look at the Gear Search Returns
You could also "Try" to model it yourself
Will you be manufacturing those gears, or will you be purchasing "off-the-shelf"?
Retrieving data ...