When I add Location and Size Dimensions in a part using MBD Dimensions, it will display the dimension with a precision of 2 even though unit precision is set to 3 or 4. When I go the property manager for that dimension the precision is not set to "document". Where do I set the MBD dimensions to use document instead of defaulting to precision of 2.
Those set the tolerances, not the precision. Check my attachments and you'll see it only displays 2 decimal places.
In Size and Location areas above, set distance to Block. Then you have options for default places. In 3D, precision is more commonly established by the size of the feature by default rather than block tolerances, but you have the option to use block if you wish.
I see it now, "Decimals". What is the significance of Tolerance 1 2 and 3? What do these refer to?
It's a standard .X .XX .XXX tolerance block you'd find on most North American drawings. It is invoked when you choose Block Tolerance. Once you choose Block Tolerance, you can specify your default .XX for each type of dimensional annotation.
Got it! Thank you.
Mike, they can be found here within multiple tabs ...