Can someone help me how can i change my Command manger from figure1 tofigure 2
Tools / Customize / Toolbars
Thank you so much for the immediate response.
This is the similar to the figure 1 with smaller size but if you check the figure 2 you can find there without any folders. All commands are displayed.
Pattabi, you'll want to click the "Use large buttons with text" toggle ...
Thank you so much for the immediate response. But i mean how can i make all the commands to display without any folder i highly recommend check my figure 2 picture so you will get what i mean
Your figure 2 shows various toolbars at the top of the tree instead of the Command Manager. If you want the toolbars then just right-click on a blank section at the top of the SW screen to get the list shown below. De-select "CommandManager" and select the toolbars you want to show. You'll need to manually arrange the toolbars as desired.
Thank you so much for the help Glenn Schroeder! Finally, I made it.
So you don't want Command Manager.
You want Toolbar.
Right click on the top menu bar.
Turn off CommandManager.
Check any of the other you want.
Like Sketch, Feature, Assembly.
Thank you so much for the help Frederick Law! Finally, I made it.
Retrieving data ...