please how do i make the face marked in pink lower than the black part with 1 mm or 0,5 mm eg. like cutting it out
below is the original picture in black i am learning to do this. please help by uploading files or links
You could try doing it with a second revolve (don't merge, creating a second body), cut the arm shape, pattern the arm & then combine. Then add fillets & holes or you could add hole before doing the pattern.
Have you tried Move Face?
Did you try Offset Surface??
a little more information would help since you did not give much.
So the pink part is to be lower than the black part - but the hole part is black.
Do you want just the portion shown in pink to be lower than that leg that it is part of (so it would step up or down from where it is?
Do you want the leg that has the pink area to be lower than the other legs?
Do you want all legs to be lower than the center ring?
I am on an old version of SWX so I can't open your part to see how it was made, so I can't help much.
I can add more but you should get the idea of what we need to answer you.
I don't have 2019 either but I can import/export using Fustion 360 (since SW Corp does not provide any way to communicate) and I can guess this is what they may want to do?
please this is my target i need that part lower not higher but i would love to know how to do both please upload your file so i can practice
I have just added more files and posted original picture
please could you upload your file . that would be great
Sure, find attached in SW 2019.
whaoooo your method is so easy. thank you very much i was overthinking it
Retrieving data ...