Hiee All,
We are facing following major issue when Solidworks 2D drawings are converted in .dwg format.
a) When we convert Solidworks drawing file in .dwg format & if we move/modify the dimension in .dwg then Tolerance disappears for the break dimension (refer below pics).
Is their any method to overcome the above issue?
Like Sergio Monti said, when I try to follow the link to view your image it gives me this:
Can you try inserting your image directly in the message?
Do not upload image directly from you email but download/save that to your disk and then upload here.
Hi Abhishek,
First, do what Deepak says.
Later...
in this way, not the path of the picture, you install the picture itself.
English is not my first language - If you point out my mistakes I'd be very grateful..
Thank You Mr. Gupta
Please find below pics.
Why you're modifying the value in DWG and why not in SW itself. Again it could be related to DWG editor you're using or standard/scale/unit issue but not SOLIDWORKS.
Thank you for reply.
Our Client required .Dwg format hence when he update/modify the drawing view ,then Tolerance disappears for the break dimensions.
Is their any method to overcome the above issue please let us know?
Did you try?
As I understand autocad sees them as a line not as dimensioning them.
Does this window open when you click on the dimensions?
I checked it, but not solved the problem. refer below pic.
Can you add the Autocad file? I'm not promising, but I can examine.
How can i add the .zip file folder here
Sorry for Inconvenience ,
I have updated access setting.
Please check again.
https://drive.google.com/open?id=1A5Aknh9T8lAKL5mFbb_qSHzumvFux1o5
Thank You Omur Tokman
Please find below link for Autocad and Soliwork file, let us know if you find any solution.
https://drive.google.com/open?id=1A5Aknh9T8lAKL5mFbb_qSHzumvFux1o5
Sorry!
I couldn't find a solution or a logical explanation.
Something I noticed! maybe that'll help!
When you delete Break View in SW, it doesn't make a mistake in Autocad.
English is not my first language - If you point out my mistakes I'd be very grateful..
ömür tokman wrote:
Sorry!
I couldn't find a solution or a logical explanation.
As stated earlier, this is correct behavior.
This is a correct behavior as break view is not considered in 2d drawing while dimensioning. And due to break view the dimension is being considered overwritten/overridden in 2d due to which deviation goes off. If you remove the text overwritten/overridden, then you would see the deviation back.
Thank You. Mr. Deepak Gupta.
But still is their any way overcome this issue.
Abhishek Lad wrote:
Thank You. Mr. Deepak Gupta.
But still is their any way overcome this issue.
You would have to type the tolerance along with the dimension value text.
Hi Abhishek Lad, the image is 'gone'!