When open this file there is an empty space in the left and right side of the graphic area. Other files do not have such a problem. What is the reason for that?
In the folder this file icon is smaller than other file icon.
I don't know what that is, or what's going on with the Part. When I opened it, in addition to the blank space on each side,I couldn't rotate or move the model. However, as soon as I clicked on Boss-Extrude 1 in the tree everything returned to normal.
Thanks for your advice.
It is due to camera mode being active.
Deepak Gupta I was thinking that might be it but I couldn't open the file on SW17 and couldn't replicate it on my machine. I've had a similar thing happen quite a while ago and it seemed like it was related to the camera view.
Joel/Maha, it is due to camera only. Switch to any other view orientation and all would be good.
I am using SWX 2019 Standard. I couldn't see any Camera mode.
OR press space bar and switch to any standard view orientation. You may use keyboard shortcut also, for e.g. Ctrl +1 = Front view.
Check if camera is not suppressed. If yes then unsuppress it.
Video is attached.
Right click on the camera and select add camera. After that camera should be visible.
Thanks, now it is okay. How to switch off the camera view. I deleted it, graphic window return to normal.
Maha Nadarasa wrote: Thanks, now it is okay. How to switch off the camera view.
Maha Nadarasa wrote:
Thanks, now it is okay. How to switch off the camera view.
Set it off under display OR switch to any other orientation view.
Retrieving data ...