Hello I will attach my file below but i am having issues with the helix and sprial around the neck I have tried the swept tool but its not working for me please may someone help me do this?
Sweep and merge only with 1 side.
Then cut off the excess of only that body, and repeat this for the other side of the bottle so there will be 2 sweeps and 2 extrude cuts.
What is the issue that you are having with this?
I cant make the sprial solid when I sweep it
What sketch are you trying to sweep? I don't see any profile to sweep along the spiral.
The issue isn't with the throat, it is with the rest of the model. I recommend you do the sweep but only select 1 body as the body to merge with, this lets you sweep without error. Then you can make a cut to cut away the excess of only that body. Just repeat this for the other side and you have what you wanted.
Thankyou so much this worked!!
First, Fully define your sketches. Second, correct the model as there are many disjoint sections between bodies. Third, combine the bodies into one uniform piece before attempting to add a thread and merge everything in the same command (Results in ZTG). Lastly, You will need to actually create a thread profile sketch to be swept along the helix, unless you intend to use the thread feature.
Hello Nicole,.. more importantly, your parting faces (pre Mirror4) are not planar.. you need to make them planar so your Mirror4 resolves (merges the two halves).
Thankyou very helpful:)
..no problem,.. here's the file for your reference..
Hello sorry wheres the file?:)
Nicole,.. it's there,.. you are probably viewing a email response?... so, you need to login to the forum.
Retrieving data ...