could you please help me make part with lofted bend feature- bent function?
With formed function I made it very ok, but bent function I meet the error "bend radius is big".
Please see my file.
Thank you very much.
Works fine here?
Have you tried disabling the verification on rebuild?
Dear Søren Stærk,
Thank you for pointing me about option in solidworks.
In formed function, that work fine.
But I need to make it in bent function.
Could you please show me the way to solve "The bend radius is too big for this body".
please refer image
I've seen this one "must to unhide it first (lofted bend)"
This is the part
Dear Rubén Rodolfo Balderrama,
Thank you for your view. But The hidden in my part is the lofted-bend which I used in Formed Lofted Bends
In Formed Lofted Bends I made the fillet to create the tangent and I succeed.
But In fact, I need to create part in Bent Lofted Bends. I made two sketch 144-145 to try Bent Lofted Bends. but I didn't succeed because the error The bend radius is too big for this body" appear . Please help me solve it.
I see the problem is....your K-Factor is for Rmin=Thinkness
As you can see in your lofted bend inner radii will be 0.05 too tiny for your K factor....
To made able modify the K-Factor table or try to give a radii exteranl on 2.6
Thank you for your help. I am sorry but I don't understand your explain clearly. With formed lofted bend, I can unbend this part. But I need bent lofted bend to convert the spline curve to line for adapting manufacture condition. May be the part model can not use in bent lofted bend context?
lofted bend does not work in sharp corners.
It has to be fillet (radius).
for out........ radius 0,10
for inside...... radius 1,70
That's it Omur it's too simple to understand.....sometimes I think, people needs to understand the basic....
Retrieving data ...