So as of this evening, my mouse center button changed. It used to only rotate my part. Now it always zooms to fit before it allows the rotate to happen. How can I get the zoom to fit to NOT happen?
Armand Mendez wrote: So as of this evening, my mouse center button changed. It used to only rotate my part. Now it always zooms to fit before it allows the rotate to happen. How can I get the zoom to fit to NOT happen?
Armand Mendez wrote:
Somebody who uses the same mouse might be able to answer your question but for that we need to know what kind of mouse it is.
Logitech M585 mouse
I use a Logitech M705.
With mine a double click is zoom to fit.
Click and hold is rotate.
Are you sure the middle button isn't just sticking?
Usually its a double click on the scroll but that is zoom to fit. So this setting may be altered or even if the mouse has mechanically broken you may just need to not press so hard down on it?
Mouse is in good shape. Has been working correctly for the past year. Replaced the mouse after Dog chewed it up with the same model. Worked beautifully until the other evening.
I have a similar, although not identical, issue... Logitech Mx518. It has several buttons, one of which I used to have mapped to middle-click, because it was much easier to press than the scroll wheel. Now, no matter how I try to map it I always get a zoom-to-fit before rotating. Pressing the scroll wheel still works correctly. I've messed around with settings all the ways I could think of, but no matter how I map it, no matter which button it is, I always get a zoom-to-fit with any button except pressing down on the scroll wheel. Definitely annoying. I'm not sure when it started happening. Wish I had an idea.
I know this post is old and there seems to be no settings to remedy this. I am using an Logitech mouse connected through bluetooth and had the same zoom to fit when rotating. I then connected the mouse via the usb unifying receiver and the issue was gone and panned as usual. Hope this helps.
I am having this issue as well, and it's rather frustrating. Couple of observations...if I use the Rotate command from the toolbar menu the Rotate command works without the Zoom Extents behavior. It also seems if I am very gentle with my mouse click the Zoom Extents is not activated...but not always. I have been using multiple Parametric CAD software products for years, but am relatively new to SW, so I'm guessing there is some level of operator error. That said, this behavior seems a bit odd.
I'm on SW 2017 (haven't updated yet because of the time it takes switching from Workgroup PDM). Mine started doing this zoom out thing just now with a bluetooth Logitech Anywhere 2 mouse. The middle click is fully functional in every other application. It does not do it with a Logitech receiver (which are annoying to keep taking out or to have break off my laptop in the bag). While using bluetooth I noticed that it doesn't zoom out if I have the mouse moving when I hold down the middle button. That will take some getting used to, but it's the solution I'm going to try for now.
So this randomly started happening to me as well with a Logitech Master 2S in SolidWorks 2019 and I think I solved it. I simply removed the Bluetooth device and re-added it and it was working normally!! solved
Works for me too! Thank you. Having to have the mouse moving when hitting the middle button was really annoying. Hopefully it won't break again that often.
Same here! I just disconnected my Logitech MX Anywhere mouse from bluetooth, then reconnected it, and the problem went away.
Retrieving data ...