I was wondering if you fine folks could give my model (SW15) a looksie and see if it accurately represents the drawing? I think a view from the side would have been a huge help with this one but no such luck.
Thanks in advance for your help,
looks good to me, Auto dimension even worked well!
i might have made it in 2 parts though where the seam line is. If its meant to be a formed part i would change the inside radius of the seam to make it less noticeable.
I agree but I have to make it per the drawing.
Looks like it is meant to be two separate parts that are then welded together:
Yes that is the case. I figured it would be easier to make the entire thing in one file. If you zoom in on the part you can see that is is split in two. Also it shows up as 2 solid bodies in the feature tree.
That is showing where the radii meet the part coming off the side. You do have to take into account that this was originally drawn by hand so there may be some errors.
I thought there was a narrow passage.
it was a true and beautiful drawing.
I noticed that the red section on the pic below was off on my model. I changed it up and I think it looks exactly like the drawing now.
What do you think?
it happened now.
I think it's perfect.
Retrieving data ...