Is anyone have trouble with the variable radius not working in 2018? See below images.
This is the preview window.
It creates the feature with no error but the sucker is in stealth mode or something.
Fixed the problem. I had the side wall bottom perimeter setup with two connected splines to give me more control points to adjust.
I ran a fit spline on them so that there was only one. I added extra control points to the single spline and it worked fine.
I have used variable radius on footwear products for years now and that is the first time that has ever happened to me.
Thanks for trying to help Paul. I really appreciate it.
Hello Chris,.. that is not good... I played with a example and don't see anything so it seems specific for your geometry.. and SP?
(attached image, sole w/variable fillet using SP2.0)
That is what I was thinking too, but the geometry is very simple. A very strange issue. I tried a surface fillet with the bottom 2 surfaces only figuring that the radius might be hitting the top surface because it is pretty contoured. It can't even create it on those.
Paul Salvador what example? Did you build an example from his posted picture? I ask because this is the third thread where I have seen folks talk about the attached model or sample and I do nt seem to have access to it.
Helly John,.. I thought I had... so, I'll attach it to my above response.
Retrieving data ...