This image is the final design. Attached is my file. I'm having difficulty with the swept feature.
Put an offset plane from the end face. Put a sketch point so that it projects in the center of the end face. Loft from the end face to the sketch point, using the end condition Tangent at the point. That should do it.
Try using a centreline Loft instead of a sweep.
Just to clarify what the others said, a Sweep feature will use the same profile for the entire length. If you want a profile that changes from one end to the other you need to use a Loft feature, with at least 2 profiles.
- remove the Fixed constraint on 3DSketch2 and make it coincident to the center path.
- add the outer GC (guide curve) within Sketch1
- add a Dome feature at the end of the hook
Retrieving data ...