hi
i'm learning to use solidwork PCB these days,after drawing a schematic in SW PCB ,when i wanna pull it to SW ,i click on "Pull Board from Project" ,after selecting my project these error occur [Attachment]: do you guys know why these happen ?
and i wanna add that i'm working on a computer with 4G RAM ,can be that the reason for arising this problem?
I have the same problem here, and yes, my vault is installed on the same computer as SWPCB. I can't get add holes on my board shape when I try to pull the project from SW, the SWPCB does recognize the change.
I am a little confused by what you are saying... Are you getting same error message that was originally posted or are you unable to create holes in SW MCAD and transfer them to PCB?
Yes, I'm unable to create holes in SW MCAD and transfer to PCB. I guess that the PCB doesnt recognize when I make some holes in SW MCAD, I have to create pads from PCB and edit this "holes" in SW mcad.
A little tip I just heard about mounting holes. You're going to have to make a separate sketch for the mounting holes as PCB won't recognize them when they're part of the original shape sketch for the board outline.
Steve C
The only way to get holes to properly transfer from MCAD to PCB is to create an individual sketch and cut feature for each individual hole... For example if you want 4 mounting holes you need 4 separate cut features.
Also be aware that hole wizard created holes are not supported either.
Great, I got it, thanks Douglas, It worked!
Which versions are you running?
SW
SW PCB
PCB Services
BR
Markus
Do you have SW PCB Services loaded and have been signed in? Not an expert here but if you don't do that portion first on the install, you'll have problems.
It could be the "connector" portion that isn't loaded or turned on, too.
Steve C
It's purely a networking issue... Is your vault installed on the same computer as SWPCB?